March 2017
STEEL SECURITY GRILLES

STEEL SECURITY GRILLES
AMETCO’S STEEL SECURITY GRILLES LATTICE DESIGN were used at the CEDAR LEE PARKING GARAGE in Cleveland Heights, Ohio. The LATTICE DESIGN one of AMETCO’S electro forged welded steel grilles that is fabricated to order, then hot dipped galvanized before it is powder coated to the color of your choice. The combination of hot dip galvanizing and powder coating gives the grilles the best corrosion protection on the market today. In addition to the LATTICE DESIGN which is 2-7/16” x 2-19/32” mesh AMETCO offers 5 additional electro forged designs. All of Ametco’s grilles and fence products are manufactured in the USA at our Willoughby, Ohio plant.

February 2017
ALUMINUM DOUBLE SWING GATE

ALUMINUM DOUBLE SWING GATE
AMETCO’S aluminum fixed louver double swing gate Venetian Design was used at THE AUTO OWNERS INSURANCE IN EAST TRAVERSE CITY, MI. The Venetian Design aluminum fence infill panels provide 100% visual screening but allowed air flow because of its fixed louver design. The Venetian Design is the only Ametco fixed louver aluminum fence that allows 100% visual screening in any direction. This allows the louver to run either vertically or horizontally and still provide 100% visual screening. The Venetian Design Aluminum Fence, as all of Ametco’s aluminum fence designs, are manufactured in the USA at our Willoughby, Ohio plant.

November 2016
MONORAIL CANTILEVER GATE

MONORAIL CANTILEVER GATE
The newest style of cantilever gates by Ametco is the monorail cantilever design. Ametco has furnished over 20 monorail cantilever gates from 18 to 42 foot wide and on each installation the results have been outstanding. The weight of the gate can be as heavy as 5,000 pounds yet it will still operate smoothly. This is attributed to the weight of the gate riding on two carriages that are mounted on the footer not hanging from posts. The monorail design also allows the overhang of the gate to be 30 percent of the opening not the 70 percent as on the older style cantilever gates. The 38 foot opening monorail cantilevered gate shown above is at the Sanford Public Safety Complex in Sanford, FL.

November 2016
STEEL OPEN MESH RAILING

STEEL OPEN MESH RAILING
The Steel Open Mesh Railing at The WEST CHESTER UNIVERSITY is AMETCO’S GROTTO DESIGN with a mesh size of 1-21/32” x 5-3/16”. Ametco Grotto Design is electro-forged welded steel railing infill panels. After fabrication the Grotto Design is hot dip galvanized then coated with a polyester powder coating for the best corrosion protection in the industry. The choice of color gives an “extra” touch of appeal to the railing, harmonizing with its surrounding. Ametco also manufactures perforated aluminum railings and aluminum blade railings. All of Ametco railing systems are manufactured in the USA at our Willoughby, Ohio plant.

October 2016
STEEL FIXED LOUVER DOUBLE SWING GATE

STEEL FIXED LOUVER DOUBLE SWING GATE
Ametco’s Shadow 100 Design steel Double Swing gate was used at the Bluestone Elementary School in Euclid, Ohio. Ametco’s swing gates are a tube design frame, which can be in filled with one of Ametco’s steel security fence or fixed louver steel, aluminum or stainless steel design infill panel. Ametco Swing Gates are protected by an extremely effective coating system, giving long life with a touch of elegance. The steel swing gate frames and infill panels are controlled hot dip galvanized and then coated with thermo hardening powders, which gives Ametco swing gates protection from the elements and eliminating maintenance. All of Ametco architectural products are manufactured in the USA at our Willoughby, Ohio plant

September 2016
STEEL SECURITY GRILLES

STEEL SECURITY GRILLES
 Ametco’s METRO DESIGN steel security grilles were used at the  New York Botanical Gardens Parking Garage. After fabrication the METRO DESIGN steel security grille is hot dipped galvanized than  is polyester powder coated to one of Ametco’s 15 standard colors. The added color allows the security grilles to harmonize with their  surroundings. The open mesh of METRO DESIGN is ideal for  application like parking garages where air flow is critical. Ametco  has 6 different open mesh designs. All of Ametco Manufacturing Corporation’s architectural products are manufactured in the USA . For more information click on the following: http://www.ametco.com/grilles_and_ screens/architectural_grilles/

August 2016
ALUMINUM FIXED LOUVER FENCE

ALUMINUM FIXED LOUVER FENCE
AMETCO’S ALUMINUM VENETIAN 90 Design at Sarasota County Data Center in Sarasota, Fl. is one of five fixed louver design aluminum fences that AMETCO offers. All five designs can be furnished with 100 to 60 percent direct visual screening. The one difference that Venetian design offers is screening from any direction. This allows the Venetian design to be used either horizontally or vertically with effective screening. Venetian design, like all of AMETCO’s  fixed louver aluminum fencing is powder coated after fabrication to give an “extra” touch of appeal to the fencing, harmonizing with its surroundings.

July 2016
STEEL RAILINGS

STEEL RAILINGS
AMETCO MANUFACTURING METRO DESIGN galvanized and powder coated railing system was used at THE STATEN ISLAND FERRY DOCK IN NEW YORK. The electro-forged welded steel Metro Design is 2-7/16” x 5-3/16” mesh with 1” x 1/8” main bar and 3/16” cross bars. . The Metro Design steel railing was galvanized then powder coated after fabrication to give it an extra touch of appeal and harmonize with its surroundings. Metro Design is one of six steel railing systems manufactured by Ametco. In addition to the electro-forged welded steel railing system Ametco also manufactures aluminum and perforated railing systems. All of Ametco’s railing systems are manufactured in the USA at our Willoughby, Ohio plant.

June 2016
PERFORATED ALUMINUM FENCE

PERFORATED ALUMINUM FENCE
Ametco’s PERFORATED ALUMINUM FENCE allows you to select the size and shape of the opening. You can select round, square, round ended slots or square ended slots. The perforations can be either straight row or staggered centers. The slots can run either horizontally or vertical. In addition it lets you decide the percent of open area. The perforated panels bolt into the tube frame section for easy installation in both the fence and gates frames. All of Ametco Manufacturing Corporation’s architectural products are manufactured in the USA.

May 2016
METRO DESIGN STEEL FENCE

METRO DESIGN STEEL FENCE
With the figures in for the year 2010 Ametco’s Metro Design steel fence was the number one seller followed closely by Shadow  Design steel fence and Eclipse Design aluminum fence. All three designs were used not only for fencing but also for gates, railings, grilles and sunshades. Metro Design is Ametco’s galvanized steel open mesh fence. Shadow Design and Eclipse Design are fixed louver fencing offering either 80 or 100% direct visual screening. The year also saw the monorail cantilever gate system become the standard for Ametco cantilever system with great success. Ametco also built our largest double swing gate that was 30 foot wide x 14 foot 7 inches high that performed to our highest standards.  

February 2016
STOCK TRASH ENCLOSURES

STOCK TRASH ENCLOSURES
Ametco’s SHADOW 100 steel fixed louver design is now in stock 8, 12 AND 16 Foot widths X 7 foot high. The hot dipped galvanized enclosures can be shipped in 1 one week. Powder coated to one of Ametco’s 15 standard colors can be shipped in 3 weeks. Ametco can custom fabricate your enclosure requirements in 8-10 weeks. All of Ametco’s enclosures are manufactured in our Willoughby, Ohio plant in the USA.

January 2016
CANTILEVER GATE

CANTILEVER GATE
Ametco Manufacturing Corporation perforated aluminum monorail gates were used at the East Valley bus operations In Phoenix, Az. The perforated infill panel in the gate allows clear vision and still provides the security that is required. The perforated panel can have open area of 10 to 60% and use round, square or slotted holes. After fabrication the gate is then powder coated to one of Ametco’s 15 standard colors to add lasting beauty. All of Ametco’s perforated monorail gates can be furnish in galvanized steel as well as aluminum. Ametco products are manufactured in our Willoughby, Ohio plant in the USA.

November 2015
FIXED LOUVER ALUMINUM DOUBLE SWING GATE

FIXED LOUVER ALUMINUM DOUBLE SWING GATE
Ametco Manufacturing’s Aluminum double swing gates with Eclipse 100 Design infill panels were used at the Newton Falls School. Eclipse 100 Design fixed louver fencing provides 100% direct visual screening. After fabrication the aluminum double swing gates are powder coated to one of Ametco’s 15 standard colors. The choice of color allows the swing gates to harmonize with any setting and provides years of maintenance free beauty. In addition the swing gates Ametco manufactures a complete line of V-Wheel roller gates and Cantilever gates in both steel and aluminum. All of Ametco’s Architectural Products are manufactured in Willoughby, Ohio in the USA.

October 2015
STEEL SECURITY FENCE

STEEL SECURITY FENCE
A & V STEEL LLC furnished for P. S. 78 Playground in Queens, New York Ametco’s Grotto Design steel security fencing and gates. Ametco manufactures single and double swing gate, V-wheel rolling gates and cantilever rolling gates. Grotto® Design is an electro-forged welded steel security fence and gates that are hot dip galvanized after fabrication. The galvanized fence and gates are then powder coated with one of 15 standard colors or color of your choice. The color gives an “extra” touch of appeal to the fencing and gates harmonizing with its surroundings. The steel fencing and gates for this project were manufactured in the USA at Ametco’s Willoughby, Ohio Plant.

September 2015
STEEL RAILING

STEEL RAILING
The steel railing on the running track at the New Saline High School is  Ametco Mfg. Corp. Metro Design steel railing. The electro-forged welded steel railing was radius to fit the track that ran above the gym floor. Metro Design is one of six steel railings  Ametco manufactures in addition to aluminum and perforated railing systems. The Metro design steel railing was powder coated after fabrication to  give an extra touch of appeal to harmonize with its surroundings. All of Ametco’s railing systems are manufactured in the USA at our Willoughby, Ohio plant.

June 2015
STEEL SECURITY FENCE & GATES

STEEL SECURITY FENCE & GATES
Ametco Manufacturing Corporation’s METRO DESIGN galvanized steel security fencing was used at THE CHILDERNS HOME IN CATONVILLE, MD. METRO DESIGN steel fencing is electro forged welded steel that is fabricated than hot dip galvanized before being powder coated for the best maintenance free finish with a 20 year warranty. The choice of color can be any of Ametco’s 15 standard colors or a custom color of your choice. The METRO DESIGN has a 1” X 1/8”” main bar with a 3/16” round cross bar and mesh size of 5-3/16” x 2-19/32 inch. METRO DESIGN is one of 6 open mesh designs of steel security fencing Ametco offers. Ametco’s steel fencing is manufactured in the USA at our Willoughby, Ohio plant.

May 2015
SUNSHADE CANOPY

SUNSHADE CANOPY
AMETCO’S SUNSHADE CANOPY were installed at the East Stroudsburg HS in Pa. Ametco’s Bar Grille Sunshades were used at this location. Our Sunshade Canopies can be fabricated with one of Ametco’s 4 sunshade styles, the Bar Grille, Extruded Aluminum, Fixed Louver or Perforated Aluminum Sunshades. The Bar Grille and Fixed Louver Sunshades can be furnished in galvanized steel or aluminum. Once an order is placed, detail drawings of sunshade and outriggers are furnished for your approval before fabrication is started. After fabrication the sunshades are then powder coated to one of 15 standard colors or a custom color match for lasting beauty.

February 2015
STEEL SECURITY FENCE AND GATES

STEEL SECURITY FENCE AND GATES
Ametco Manufacturing Corporation’s LATTICE DESIGN galvanized steel security fencing was used at ENDEAVOR ELEMENTARY SCOOL. LATTICE DESIGN steel fencing is electro forged welded steel that is fabricated than hot dip galvanized before being powder coated for the best maintenance free finish with a 20 year warranty. The choice of color can be any of Ametco’s 15 standard colors or a custom color of your choice. The LATTICE DESIGN has a 1” X 1/8”” main bar with a 3/16” round cross bar and mesh size of 2-7/16” x 2-19/32 inch. LATTICE DESIGN is one of 6 open mesh designs of steel security fencing Ametco offers. Ametco’s steel fencing is manufactured in the USA at our Willoughby, Ohio plant.

December 2014
PERFORATED ALUMINUM FENCING

PERFORATED ALUMINUM FENCING
Ametco Manufacturing Corporation Perforated Aluminum Fencing was used at The Lorain Community College. Perforated Fencing allows for the widest selection of opening shapes (round, square or slotted) the opening size (1/8” to 4”) and the percent of open area from 10% to 60%. The perforations can be on straight row center or staggered centers. This flexibility allow you to create the look and security you want to achieve. After fabrication the perforated aluminum fence is powder coated to one of Ametco’s 15 standard colors or matched to the color of your choice. Ametco’s perforated aluminum fencing and gates are manufactured in the USA at our Willoughby Ohio plant.

October 2014
STEEL SECURITY GRILLES

STEEL SECURITY GRILLES
AMETCO’S STEEL SECURITY GRILLES LATTICE DESIGN were used at the STARK COUNTY JAIL PARKING GARAGE.. The LATTICE DESIGN one of AMETCO’S electro forged welded steel grilles that is fabricated to order, then hot dipped galvanized before it is powder coated to the color of your choice. The combination of hot dip galvanizing and powder coating gives the grilles the best corrosion protection on the market today. In addition to the LATTICE DESIGN which is 2-7/16” x 2-19/32”” mesh, AMETCO offers 5 additional electro forged designs. All of Ametco’s grilles and fence products are manufactured in the USA at our Willoughby, Ohio plant. .

September 2014
STEEL SECURITY FENCE

STEEL SECURITY FENCE
Ametco Manufacturing Corporation’s Grotto Design galvanized steel fence was used at an outdoor basketball court at the Central Middle School in Columbus, In. Grotto Design steel fencing is electro forged welded steel that is fabricated than hot dip galvanized before being powder coated for the best maintenance free finish with a 20 year warranty. The choice of color can be any of Ametco’s 15 standard colors or a custom color of your choice. The Grotto Design has a 1-21/32” x 5-3/16” mesh with a 1” x 1/8” main bar and 3/16” round cross bar. Ametco’s steel fencing is manufactured in the USA at our Willoughby, Ohio plant.

August 2014
ALUMINUM BAR GRILLE SUNSHADE

ALUMINUM BAR GRILLE SUNSHADE
ALUMINUM SUNSHADE was used at the Home Depot in New Jersey. Style 101 bar grille sunshades are designed with 2” x 3/16” bar on 1-3/16” centers to achieve 60 degrees incident angle of sun shade. Most sunshades are horizontally mounted above the window but Ametco can also custom fabricate vertical sunshades to meet your requirements. Once an order is placed detail drawings of sunshade and outriggers are furnished for your approval before fabrication is started. After fabrication the sunshades are then powder coated to one of 15 standard colors or a custom color match for lasting beauty.

May 2014
DOUBLE SWING GATES

DOUBLE SWING GATES
Ametco’s Shadow 100 Design Double Swing was used at the Museum of Science and industries in Chicago, Il. Ametco’s swing gates are a tube design frame, which can be in filled with one of Ametco’s steel security fence or fixed louver steel, aluminum or stainless steel design infill panel. Ametco Swing Gates are protected by an extremely effective coating system, giving long life with a touch of elegance. The steel swing gate frames and infill panels are controlled hot dip galvanized and then coated with thermo hardening powders, which gives Ametco swing gates protection from the elements and eliminating maintenance

May 2014
STEEL DOUBLE SWING GATES

STEEL DOUBLE SWING GATES
Ametco Manufacturing Corporation galvanized steel fixed Louver Shadow 100 Design double swing gates at Walgreens in Parma, Ohio. The Shadow 100 fixed louver double swing gates provide 100% direct visual screening. After fabrication the steel gates are hot dipped galvanized then powder coated for lasting beauty. Shadow design is also available as Shadow 80 Design for 80% direct visual screening. The polyester powder coating is available in 15 standard colors or match to the color of your choice. The color coating give the gates an extra touch of appeal to harmonize with its surroundings. All of Ametco architectural products are manufactured in the USA.

February 2013
ALUMINUM FIXED LOUVER FENCE

ALUMINUM FIXED LOUVER FENCE
Ametco’s aluminum Phoenix Design enclosure  was installed @ Berks Woman in Crisis Center in reading, Pa. Phoenix Design is a 4 inch x ½ inch aluminum extrusion  welded as a fixed louver to produce 80 or 100 percent visual screening. After fabrication  Phoenix Design is powder coated to one of Ametco’s 15 standard colors. The choice of color allows the enclosure to harmonize with its environment. Ametco has 5 different designs of fixed louver fencing.  All of Ametco’s enclosures, fencing and gates  are manufactured in the USA at Ametco’s Willoughby, Ohio plant.  

January 2013
STEEL SECURITY GATES

STEEL SECURITY GATES
A New York city high school utilizes Ametco’s steel security bi-folding double swing gate Metro® Design. Ametco also manufactures single and double swing gate, V-wheel rolling gates and cantilever rolling gates.  Metro® Design is an electro-forged welded steel security fence and gates that are hot dip galvanized after fabrication. The galvanized fence and gates are then powder coated with one of 15 standard colors. The color gives an “extra” touch of appeal to the fencing and gates harmonizing with its surroundings. The steel gates for this school were manufactured in the USA at Ametco’s Willoughby, Ohio Plant.                                                       

November 2012
STEEL SECURITY GRILLES

STEEL SECURITY GRILLES
Ametco’s steel security grille Metro Design was used at the 17th Street parking garage in Miami, Fl. Metro Design is one of Ametco’s six grille designs that are electro-forged welded steel panels to provide strength and security. The Metro Design panels were furnished radius and raked to fit the spiral stair case. This job was installed 16 years ago but the photo was taken recently showing how the hot dip galvanized and powder coating maintained its color and beauty in the coastal city of Miami. The grilles are manufactured to be both functional and decorative, harmonizing visually with any environment.  

September 2012
STEEL DOUBLE SWING GATES

STEEL DOUBLE SWING GATES
Ametco Manufacturing Corporation galvanized steel double swing gates were used to enclose a storage area at the Lansing Community College. Shadow 100 was used to provide 100% direct visual screening.  The Shadow 100 Design double swing  gate was fabricated then hot dip galvanized before powder coating. The hot dip galvanizing and powder coating is the best maintains free protection with a 20 year warranty on the market today. The powder coating in addition to the protection from the weather also gives you the choice of color to harmonize with it’s surroundings. The steel gates for this enclosure were manufactured in the USA at Ametco’s Willoughby, Ohio plant.

August 2012
PERFORATED STOCK SHEETS

PERFORATED STOCK SHEETS
Ametco Manufacturing Corporation has a large inventory of perforated sheets in steel, aluminum, stainless steel and plastic. The inventory items are ready for shipment within 24 hours. Ametco also offers complete fabricating service that allow the inventory item to be sheared to size, formed, rolled, or welded to meet your requirement. In addition to the standard items carried in stock,  Ametco can custom perforate your requirements allowing you to chose the material, perforation, margins and sheet size. All the perforated sheets and fabrication is done in our Willoughby, Ohio plant in the USA

May 2012
ALUMINUM FIXED LOUVER FENCE

ALUMINUM FIXED LOUVER FENCE
AMETCO’S ALUMINUM ECLIPSE 100 DESIGN was used in a large double swing gate at the Newton Falls School. Eclipse 100 design is one of five fixed louver design aluminum fences that AMETCO offers. All five designs can be furnished in swing gates, v-wheel rolling gates and cantilevered gates. All aluminum fixed louvered designs can be furnished with 100 or 80 percent direct visual screening. Eclipse design, like all of AMETCO’s  fixed louver aluminum fencing is powder coated after fabrication to give an “extra” touch of appeal to the fencing, harmonizing with its surroundings.

April 2012
NEW ALUMINUM PICKET FENCE

NEW ALUMINUM PICKET FENCE
FALCON DESIGN Aluminum Picket Fence’s simple, clean lines allow for a vast range of applications, including prestige and high security settings from schools, to medical facilities, to sports and leisure complexes, to industrial buildings and military bases. FALCON DESIGN aluminum fence has 1” dia. pickets with swaged top on 4” centers. FALCON DESIGN aluminum fence panels are fabricated to your requirements then powder coated for a maintenance free protection and beautiful finish. The powder coating gives the FALCON DESIGN extra appeal and harmonies with its surroundings. All of Ametco’s architectural products are manufactured in the USA at our Willoughby, Ohio plant.

March 2012
MANUFACTURED IN THE USA

MANUFACTURED IN THE USA
Ametco Mfg. Corp. manufactures a wide range of architectural products in our Willoughby, Ohio plant. Steel and Aluminum Fencing, Steel and Aluminum Gates, Railings, Sunshades, Louvers, Perforated Metal and Plastic are all manufactured in our plant from raw material that is manufactured in the United States. Every effort is made to use recycled material that is harvested within a 500 mile radius of our Willoughby, Ohio plant. We believe that by sourcing our raw material domestically and doing the manufacturing in our own plant we can not only help our economy and environment but improve our competitive position with superior quality and delivery. 

February 2012
ALUMINUM FENCE

ALUMINUM FENCE
Ametco’s ECLIPSE 80 Design Aluminum Fence was used at Mifflin Elementary school in PA. The ECLIPSE 80 Design provides 80 or 100 percent direct visual screening yet the fixed louver design allow air flow making Eclipse Design ideal for equipment enclosures. The aluminum fencing system is finished with a polyester powder coating. The powder coating gives an “extra” touch of appeal to the fencing, harmonizing with its surroundings. Ametco offer 15 standard colors or custom color of your choice. All Ametco’s aluminum fence products are manufactured in the USA at our Willoughby, Ohio plant.

December 2011
ALUMINUM LOUVER SUNSHADE

ALUMINUM LOUVER SUNSHADE
Ametco’s aluminum sunshade style 201 was installed @ Best Buy in New York. The style 201 Aluminum sunshade has a extruded fixed louver on 2-1/16” centers. After fabrication the aluminum sunshade was powder coated allowing the sunshade to match the company’s logo. Ametco manufactures a wide range of sunshades that includes the aluminum sunshades, louver sunshades and perforated sunshades. All of our sunshades are custom fabricated to order to comply with the architectural and functional requirements of the project. For additional information on Aluminum Sunshades click here.

December 2011
STEEL FENCE SECURITY ENCLOSURE

STEEL FENCE SECURITY ENCLOSURE
Ametco Manufacturing Corporation Shield Design steel fence was used for a security enclosure around a stairway on the CMHA Columbiana County Housing project. Shield design is electro forged welded steel that is fabricated than hot dip galvanized before being powder coated for the best maintenance free finish with a 20 year warranty. The choice of color can be any of Ametco’s 15 standard colors or a custom color of your choice. The Shield design has a 1-21/32” x 1-3/4” mesh with a 1” x 5/64” main bar.  Ametco’s steel fences are manufactured in the USA at our Willoughby Ohio plant. For more information about Ametco's steel security fence click here.

November 2011
ALUMINUM FIXED LOUVER FENCE

ALUMINUM FIXED LOUVER FENCE
Ametco Manufacturing Corporation’s ECLIPSE 80 DESIGN aluminum fence enclosure was used at the Rolls-Royce Training Center in Indianapolis, In. The enclosure is 45 foot long x 12 foot deep x 8 foot high.  The Eclipse 80 design aluminum fixed louver fence provides 80 % direct visual screening while maintaining area flow. After fabrication the aluminum fence system is finished with a polyester powder coating. The powder coating gives an extra touch of appeal to the fencing, harmonizing with its surrounding. The Eclipse design is also furnished as Eclipse 100 providing 100% direct visual screening. All of Ametco’s aluminum fence designs are manufactured in the USA at our Willoughby, Ohio plant. For more information on Ametco's aluminum fixed louver fence click here.

October 2011
ALUMINUM DOUBLE SWING GATE

ALUMINUM DOUBLE SWING GATE
Eclipse 100 Design double swing gate was installed at the Joseph E. Thiriot elementary school in Las Vegas, Nv. Eclipse 100 provides 100% direct visual screening. The fixed louver style aluminum fence as a large double swing gate allows screening and security as well as air movement to the equipment area at the school. The aluminum fence is powder coated after fabrication to one of Ametco’s 15 standard colors or your custom color. The added color allows the aluminum gates to harmonize with their surroundings. All of Ametco Manufacturing Corporation’s aluminum fence products are manufactured in the USA.

September 2011
EQUIPMENT ENCLOSURE STEEL FENCE AND GATE

EQUIPMENT ENCLOSURE STEEL FENCE AND GATE
Ametco Manufacturing Corporation galvanized steel fencing and gates were used to enclose a equipment area at Guilford Tech Community College in Jamestown North Carolina. The Grotto Design fence and gate were fabricated then hot dip galvanized before powder coating. The hot dip galvanizing and powder coating is the best maintains free protection with a 20 year warranty on the market today. The powder coating in addition to the protection from the weather also gives you the choice of color to harmonize with it’s surroundings. The Grotto design fence and gate for this enclosure was manufactured in the USA at Ametco’s Willoughby, Ohio plant.

August 2011
ALUMINUM MONORAIL CANTILEVER GATE

ALUMINUM MONORAIL CANTILEVER GATE
This one of a kind aluminum monorail cantilever roller gate was installed at the Sanford Public Safety Complex in Sanford, Fl. The aluminum 32' cantilever roller gate with a built-in 3’ man gate used the latest monorail design to assure a smooth operating system and the 3’ man gate to have a clear opening. The gate was manufactured at Ametco in their Willoughby, Ohio plant. The infill panels in both the monorail and swing gate was Ametco’s Eclipse Design Aluminum fencing material. All of Ametco’s architectural products are manufactured in the USA.

July 2011
ALUMINUM FENCE DESIGN

ALUMINUM FENCE DESIGN
Venetian Design fixed louver aluminum fence and gates were installed at the University of Tennessee at Knoxville, Tn. The Venetian Design is a unique louver design that will provide 100 percent visual screening in any direction. The benefit to this style is the louver can run either horizontally or vertically and still provide full screening of the area it is enclosing and the louver allows air flow.  After fabrication the Venetian Design is polyester powder coated to one of 15 standard colors. The color gives an extra touch of appeal to the fencing and gates. The Venetian Design is fabricated to your requirement at our plant in Willoughby, Ohio.

June 2011
AMETCO RAILING SYSTEM

AMETCO RAILING SYSTEM
AMETCO has expanded our line of architectural railing designs to now include five new designs that utilizes 2 x ½ inch and 4 x ½ inch aluminum extrusion. Adding these designs to our steel open mesh railings and our perforated metal railing designs gives Ametco the widest range of architectural railing systems on the market today.  In addition to the infinite design options of the perforated railing system, the new 2 and 4 inch aluminum extrusions not only makeup the 5 new design but can be arrange  in different combinations, spacing and orientations to meet your requirements. Contact one of Ametco’s sales engineers to work out a railing design that works for you.

April 2011
ALUMINUM SUNSHADE

ALUMINUM SUNSHADE
Ametco’s aluminum sunshade style 102-90 was installed @ Belen Jesuit Prep School in Miami, Fl. The style 102-90 Aluminum sunshade has 2” x ½” extruded aluminum tubes on 1-3/8” centers. After fabrication the aluminum sun shade was powder coated allowing the sunshade to match the aluminum framing around the windows. Ametco also furnished the outriggers that were powder coated to match the sun shades. Ametco manufactures a wide range of sunshades that includes the aluminum sunshades, louver sunshades and perforated sunshades. For additional information on Aluminum Sunshades click here.

November 1999
POLARIS DESIGN

POLARIS DESIGN
Polaris design panels can be used in fencing, gates, sunshade canopies and railings. The panels are custom fabricated from die formed perforated and radius sections. The standard perforation for the Polaris design is 1/4 inch round hole on 1/2" staggered centers. This perforation has 23% open area. Other perforations with up to 50% open area can be used. Custom perforation can range in size from 1/8 inch to 1/2 inch round. Because of the strength of the die formed section the panel width can go up to 60 inches. The die formed section can be used either vertically or horizontally. After fabrication Polaris design is powder coated to one of Ametco's 15 standard colors or colored matched to a color of your choice. Polaris design panels and all of Ametco's architectural products are manufactured in the USA