Ametco Industrial Products Catalog

  • Type: PDF
  • (3.11 MB)

Ametco Industrial Products - Perforated Metal & Plastic - Expanded Metal - Bar Grating - Aluminum Bar Grating - Metal Fabrication - Wire Cloth - Safety Grating

32 31 24 Master Spec for Aluminum Fencing

  • Type: PDF
  • (142.99 KB)

Master Spec for extruded aluminum tube fence



  • Type: PDF
  • (1.65 MB)

Ametco Manufacturing Corp. Fence and Gates Spec Data Sheets for steel, aluminum and stainless steel.


  • Type: DOC
  • (354.5 KB)

Many of Ametco's architectural products can help builders qualify for LEED green building credits.

Ametco Powder Coat Color Chart

  • Type: PDF
  • (127.21 KB)

Ametco Standard Colors for powder coating products. NOTE: These are color reproductions and approximate the actual color as closely as possible .

Standard Colors

White Chip
Cal Gray Chip
Cal Gray
Cream Chip
Moss Green Chip
Moss Green
Red Barons Chip
Red Barons
Bronze Mat Chip
Bronze Mat
Black Velvet Chip
Black Velvet
Pale Green Chip
Pale Green
Light Blue Chip
Light Blue
Safety Yellow Chip
Safety Yellow
Blue Streak Chip
Blue Streak
Charlie Brown Chip
Charlie Brown
Light Ivory Chip
Light Ivory
Silver Chip

Download the PDF version

Custom color match available at additional cost .
NOTE: These are color reproductions and approximate the actual color as closely as possible .

Ametco 20 Year Warranty on Polyester Finish

The polyester or polyurethane coated galvanized metal will remain corrosion free for years to come. Posts and panels are hot dip galvanized to ASTM 123. The ability of a galvanized coating to meet its primary objective of providing corrosion protection should be the chief criteria in evaluating its overall appearance and in determining its suitability. Hot dip galvanizing gives the fencing a greater resistance to corrosion than that obtained using other methods.

"The life expectancy of galvanized coating on typical structural members is far in excess of 50 years in most rural environments and 20 to 25 years plus, even in severe urban and coastal exposure."*

However, the process can leave minor impurities on the treated surface, i.e.., flashing, drips, drops, etc. These do not impair the coating in terms of corrosion resistance. Color and extra corrosion protection is then added on top of the galvanized finish by using a powder polyester coat.

Performance properties of the polyester coating is as follows. Salt spray resistance: (ASTM B_117) bonderite 1000 steel panels, in a scored condition, exhibit no undercutting after 500 hours in 5% salt spray testing at 95 degrees f. and 95% relative humidity with no rusting or blistering on panel face. Under the same conditions after 1000 hours the panels showed less than 3/16" undercutting.

(ASTM D-822) After one year exposure in south Florida with panels facing south and tilted at a 45 degree angle, a high gloss white polyester coating retains 88% of its gloss (gloss reading obtained on washed panels) with no film failure.

Ametco Mfg. Corp. certifies that its fencing systems are free from defects in material and workmanship. The polyester coated galvanized metal is guaranteed not to crack, peel or blister for a period of 20 years. Accidental damages, defects resulting from improper installation and damage from vandalism or abuse are not included. Allowance will be prorated over 20 years; maximum claim can not exceed original cost of coating.

*American Hot Dip Galvanziers Association, Inc.